5.4: Reading- Painting

Painting is the application of pigments to a support surface that establishes an image, design or decoration. In art the term “painting” describes both the act and the result. Most painting is created with pigment in liquid form and applied with a brush. Exceptions to this are found in Navajo sand painting and Tibetan mandala painting, where powdered pigments are used. Painting as a medium has survived for thousands of years and is, along with drawing and sculpture, one of the oldest creative media. It’s used in some form by cultures around the world.

Three of the most recognizable images in Western art history are paintings: Leonardo da Vinci’s Mona Lisa, Edvard Munch’s The Scream and Vincent van Gogh’s The Starry Night. These three art works are examples of how painting can go beyond a simple mimetic function, that is, to only imitate what is seen. The power in great painting is that it transcends perceptions to reflect emotional, psychological, even spiritual levels of the human condition.

Painting media are extremely versatile because they can be applied to many different surfaces (called supports) including paper, wood, canvas, plaster, clay, lacquer and concrete. Because paint is usually applied in a liquid or semi-liquid state it has the ability to soak into porous support material, which can, over time, weaken and damage the it. To prevent this a support is usually first covered with a ground, a mixture of binder and chalk that, when dry, creates a non-porous layer between the support and the painted surface. A typical ground is gesso.

There are six major painting media, each with specific individual characteristics:

• Encaustic
• Tempera
• Fresco
• Oil
• Acrylic
• Watercolor

All of them use the following three basic ingredients:

• Pigment
• Binder
• Solvent

Pigments are granular solids incorporated into the paint to contribute color. The binder, commonly referred to as the vehicle, is the actual film-forming component of paint. The binder holds the pigment in solution until it’s ready to be dispersed onto the surface. The solvent controls the flow and application of the paint. It’s mixed into the paint, usually with a brush, to dilute it to the proper viscosity, or thickness, before it’s applied to the surface. Once the solvent has evaporated from the surface the remaining paint is fixed there. Solvents range from water to oil-based products like linseed oil and mineral spirits.

Let’s look at each of the six main painting media:

1. Encaustic paint mixes dry pigment with a heated beeswax binder. The mixture is then brushed or spread across a support surface. Reheating allows for longer manipulation of the paint. Encaustic dates back to the first century C.E. and was used extensively in funerary mummy portraits from Fayum in Egypt. The characteristics of encaustic painting include strong, resonant colors and extremely durable paintings. Because of the beeswax binder, when encaustic cools it forms a tough skin on the surface of the painting. Modern electric and gas tools allow for extended periods of heating and paint manipulation.

Below is an example of encaustic painting by José María Cano.

José María Cano, detail of painting made in encaustic, 2010

2. Tempera paint combines pigment with an egg yolk binder, then thinned and released with water. Like encaustic, tempera has been used for thousands of years. It dries quickly to a durable matte finish. Tempera paintings are traditionally applied in successive thin layers, called glazes, painstakingly built up using networks of cross hatched lines. Because of this technique tempera paintings are known for their detail.

Duccio, The Crevole Madonna, c. 1280. Tempera on board Museo dell’Opera del Duomo, Siena, Italy. Image is in the public domain

In early Christianity, tempera was used extensively to paint images of religious icons. The pre-Renaissance Italian artist Duccio (c. 1255 – 1318), one of the most influential artists of the time, used tempera paint in the creation of The Crevole Madonna (above). You can see the sharpness of line and shape in this well-preserved work, and the detail he renders in the face and skin tones of the Madonna (see the detail below).

Duccio, The Crevole Madonna (detail), c. 1280. Tempera on board. Museo dell’Opera del Duomo, Siena, Italy. Image is in the public domain

Contemporary painters still use tempera as a medium. American painter Andrew Wyeth (1917-2009) used tempera to create Christina’s World, a masterpiece of detail, composition and mystery.

3. Fresco painting is used exclusively on plaster walls and ceilings. The medium of fresco has been used for thousands of years, but is most associated with its use in Christian images during the Renaissance period in Europe.

There are two forms of fresco: Buon or “wet,”and secco, meaning “dry.”

Buon fresco technique consists of painting in pigment mixed with water on a thin layer of wet, fresh lime mortar or plaster. The pigment is applied to and absorbed by the wet plaster; after a number of hours, the plaster dries and reacts with the air: it is this chemical reaction that fixes the pigment particles in the plaster. Because of the chemical makeup of the plaster, a binder is not required. Buon fresco is more stable because the pigment becomes part of the wall itself.

Domenico di Michelino’s Dante and the Divine Comedy from 1465 (below) is a superb example of buon fresco. The colors and details are preserved in the dried plaster wall. Michelino shows the Italian author and poet Dante Aleghieri standing with a copy of the Divine Comedy open in his left hand, gesturing to the illustration of the story depicted around him. The artist shows us four different realms associated with the narrative: the mortal realm on the right depicting Florence, Italy; the heavenly realm indicated by the stepped mountain at the left center – you can see an angel greeting the saved souls as they enter from the base of the mountain; the realm of the damned to the left – with Satan surrounded by flames greeting them at the bottom of the painting; and the realm of the cosmos arching over the entire scene.

Domenico di Michelino, Dante’s Divine Comedy, 1465, buon fresco, the Duomo, Florence, Italy. This image is in the public domain

Secco fresco refers to painting an image on the surface of a dry plaster wall. This medium requires a binder since the pigment is not mixed into the wet plaster. Egg tempera is the most common binder used for this purpose. It was common to use secco fresco over buon fresco murals in order to repair damage or make changes to the original.

Leonardo Da Vinci’s painting of The Last Supper (below) was done using secco fresco.

Leonardo Da Vinci, The Last Supper, 1495–98, dry fresco on plaster. Church of Santa Maria delle Grazie, Milan. This image is in the public domain

4. Oil paint is the most versatile of all the painting media. It uses pigment mixed with a binder of linseed oil. Linseed oil can also be used as the vehicle, along with mineral spirits or turpentine. Oil painting was thought to have developed in Europe during the fifteenth century, but recent research on murals found in Afghanistan caves show oil based paints were used there as early as the seventh century.

Some of the qualities of oil paint include a wide range of pigment choices, its ability to be thinned down and applied in almost transparent glazes as well as used straight from the tube (without the use of a vehicle), built up in thick layers called impasto (you can see this in many works by Vincent van Gogh). One drawback to the use of impasto is that over time the body of the paint can split, leaving networks of cracks along the thickest parts of the painting. Because oil paint dries slower than other media, it can be blended on the support surface with meticulous detail. This extended working time also allows for adjustments and changes to be made without having to scrape off sections of dried paint.

In Jan Brueghel the Elder’s still life oil painting you can see many of the qualities mentioned above. The richness of the paint itself is evident in both the resonant lights and inky dark colors of the work. The working of the paint allows for many different effects to be created, from the softness of the flower petals to the reflection on the vase and the many visual textures in between.

Richard Diebenkorn’s Cityscape #1 from 1963 shows how the artist uses oil paint in a more fluid, expressive manner. He thins down the medium to obtain a quality and gesture that reflects the sunny, breezy atmosphere of a California morning. Diebenkorn used layers of oil paint, one over the other, to let the under painting show through and a flat, more geometric space that blurs the line between realism and abstraction.

Jan Brueghel the Elder, Flowers in a Vase, 1599. Oil on wood. Kunsthistorisches Museum, Wien, Germany. Used under GNU Documentation Licensing

Georgia O’Keeffe’s oil paintings show a range of handling between soft and austere to very detailed and evocative. You rarely see her brushstrokes, but she has a summary command of the medium of oil paint.

The abstract expressionist painters pushed the limits of what oil paint could do. Their focus was in the act of painting as much as it was about the subject matter. Indeed, for many of them there was no distinction between the two. The work of Willem de Kooning leaves a record of oil paint being brushed, dripped, scraped and wiped away all in a frenzy of creative activity. This idea stays contemporary in the paintings of Celia Brown.

5. Acrylic paint was developed in the 1950’s and became an alternative to oils. Pigment is suspended in an acrylic polymer emulsion binder and uses water as the vehicle. The acrylic polymer has characteristics like rubber or plastic. Acrylic paints offer the body, color resonance and durability of oils without the expense, mess and toxicity issues of using heavy solvents to mix them. One major difference is the relatively fast drying time of acrylics. They are water soluble, but once dry become impervious to water or other solvents. Moreover, acrylic paints adhere to many different surfaces and are extremely durable. Acrylic impastos will not crack or yellow over time.

The American artist Robert Colescott (1925-2009) used acrylics on large-scale paintings. He uses thin layers of underpainting, scumbling, high-contrast colors, and luscious surfaces to bring out the full range of effects that acrylics offer.

6. Watercolor is the most sensitive of the painting media. It reacts to the lightest touch of the artist and can become an over worked mess in a moment. There are two kinds of watercolor media: transparent and opaque. Transparent watercolor operates in a reverse relationship to the other painting media. It is traditionally applied to a paper support, and relies on the whiteness of the paper to reflect light back through the applied color (see below), whereas opaque paints (including opaque watercolors) reflect light off the skin of the paint itself. Watercolor consists of pigment and a binder of gum arabic, a water-soluble compound made from the sap of the acacia tree. It dissolves easily in water.

Image by Christopher Gildow. Used here with permission.

Watercolor paintings hold a sense of immediacy. The medium is extremely portable and excellent for small format paintings. The paper used for watercolor is generally of two types: hot pressed, which gives a smoother texture, and cold pressed, which results in a rougher texture. Transparent watercolor techniques include the use of wash; an area of color applied with a brush and diluted with water to let it flow across the paper. Wet-in-wet painting allows colors to flow and drift into each other, creating soft transitions between them. Dry brush painting uses little water and lets the brush run across the top ridges of the paper, resulting in a broken line of color and lots of visual texture.

Examples of watercolor painting techniques: on the left, a wash. On the right, dry brush effects. Image by Christopher Gildow. Used here with permission.

John Marin’s Brooklyn Bridge (1912) shows extensive use of wash. He renders the massive bridge almost invisible except for the support towers at both sides of the painting. Even the Manhattan skyline becomes enveloped in the misty, abstract shapes created by washes of color.

Boy in a Red Vest by French painter Paul Cezanne builds form through nuanced colors and tones. The way the watercolor is laid onto the paper reflects a sensitivity and deliberation common in Cezanne’s paintings.

Paul Cezanne, Boy in a Red Vest, c. 1890. Watercolor on paper. This image is licensed under the GNU Free Documentation License

The watercolors of Andrew Wyeth indicate the landscape with earth tones and localized color, often with dramatic areas of white paper left untouched. Brandywine Valley is a good example.

Opaque watercolor, also called gouache, differs from transparent watercolor in that the particles are larger, the ratio of pigment to water is much higher, and an additional, inert, white pigment such as chalk is also present. Because of this, gouache paint gives stronger color than transparent watercolor, although it tends to dry to a slightly lighter tone than when it is applied. Gouache paint doesn’t hold up well as impasto, tending to crack and fall away from the surface. It holds up well in thinner applications and often is used to cover large areas with color. Like transparent watercolor, dried gouache paint will become soluble again in water.

Jacob Lawrence’s paintings use gouache to set the design of the composition. Large areas of color – including the complements blue and orange, dominate the figurative shapes in the foreground, while olive greens and neutral tones animate the background with smaller shapes depicting tools, benches and tables. The characteristics of gouache make it difficult to be used in areas of detail.

Gouache is a medium in traditional painting from other cultures, too. Zal Consults the Magi, part of an illuminated manuscript form sixteenth-century Iran, uses bright colors of gouache along with ink, silver and gold to construct a vibrant composition full of intricate patterns and contrasts. Ink is used to create lyrical calligraphic passages at the top and bottom of the work.

Other painting media used by artists include the following:

Enamel paints form hard skins typically with a high-gloss finish. They use heavy solvents and are extremely durable.

Powder coat paints differ from conventional paints in that they do not require a solvent to keep the pigment and binder parts in suspension. They are applied to a surface as a powder then cured with heat to form a tough skin that is stronger than most other paints. Powder coats are applied mostly to metal surfaces.

Epoxy paints are polymers, created mixing pigment with two different chemicals: a resin and a hardener. The chemical reaction between the two creates heat that bonds them together. Epoxy paints, like powder coats and enamel, are extremely durable in both indoor and outdoor conditions.

These industrial grade paints are used in sign painting, marine environments, and aircraft painting.